Ultrasonic Testing (UT) - Welds Class Room

Is it for me?

This course is suitable for all personnel including testers, inspectors, engineers and surveyors who require a thorough and comprehensive introduction to ultrasonic testing of welded joints.

This course is also suitable for personnel working in the aerospace industry and can be found under the Aerospace section.

If time is an issue, please consider our blended learning option - study theory and concepts when and where you choose, then join the classroom sessions for hands-on practical.
Student inspecting a circumferential weld using ul
Student inspecting a circumferential weld using ultrasonic testing

What will I learn?

Classroom content

Basic principles of sound; generation and detection of sound; behaviour of sound in a material; the flaw detector; use of angled beam probes for weld scanning; welding processes and weld defects; practical exercises on test specimens containing simulated flaws; examination of parent plate, butt welds; instruction writing.

This is a one week course for PCN only, the training is in accordance with the requirements of ISO20807 and ends with the certification examination.

What will I leave with?

By the end of the course, you should be able to:

  • Explain the theoretical background of the techniques
  • Calibrate ultrasonic equipment
  • Measure the thickness of steel plates and determine levels of attenuation
  • Locate and evaluate laminations
  • Select the correct type of probe to examine welded butt joints in steel plate and aerospace components/structures
  • Report on the location and size of defects in typical welded butt joints
  • Interpret code requirements
  • Meet the syllabus requirements for PCN/CSWIP Levels 1 and 2

Certification

CSWIP Logo
PCN Logo

What else should I know?

        This direct access Level 2 training course meets the 120 hour training requirement for BS EN ISO 9712 certification.

        Level 1 training and examination can be catered for within the Level 2 course if required, contact the test centre for details.

        Price listed is for direct access Level 2 and includes examination and levy fees. For Level 1 options, please contact the test centre.

        Please note:
        All candidates attending a PCN examination (initial, retest or renewal) must provide photo ID (e.g driving licence number, passport number, PCN ID card) on the day of sitting the examination. Failure to do so will result in the candidate being turned away.

        ENTRY REQUIREMENTS
        There are no mandatory course entry requirements.

        Training requirements:
        The minimum required duration of training, which includes both theoretical and practical elements, is:

        • Level 1 - 40 hours
        • Level 2 - 80 hours (Direct Level 2: 120 hours)

        The training hours requirement is fulfilled when candidates attend one of TWI's training courses.

        Certification requirements:
        The minimum duration for experience prior to or following success in the qualification examination is:

        • Level 1 - 3 months
        • Level 2 - 9 months (Direct Level 2: 12 months)

        Certification will not be issued until successful completion of the examination and the required experience is achieved.